|
Post by scutterbob on Sept 12, 2018 3:18:39 GMT
y-connector at the battery for lower currents, understand the rated capacity is while plugged in, most are NOT rated at disconnect, or are significantly derated, so 50amp rated might mean 2.5 amp pull out. And at the mower deck I think that anderson connector is rated at 350amp, again, NOT to be interrupted. If you pull it out... it will try to WELD ITSELF TOGETHER. YOU MUST HAVE FUSE OR CIRCUIT BREAKER RATED FOR DC. But I think fuses inline might preclude some of that. Unless connection to battery directly.
|
|
gt460
New Member
Posts: 8
|
Post by gt460 on Sept 26, 2018 23:36:31 GMT
When I looked up that size Anderson connector, I think it was rated at 115A. It is turned on and off by the front contactor, which also powers the propulsion motor. The rear contactor isolates the batteries when the machine is in generate 120VAC mode. Both contactor coils are in parallel so both are on in non-120VAC mode.
|
|