|
|
Post by bgoody on Sept 5, 2018 1:22:38 GMT
Well I just my Raven a couple of weeks ago. Nice idea but I'm glad I got it for free. Everything has been fine until recently the only way it will move is if the mower blades are on! Any ideas?? Its kinda dangerous turning the blades on just to drive it. Thank you in advance.
|
|
|
|
Post by nittanydoug on Sept 7, 2018 12:30:24 GMT
First I've heard of that issue. Unplug the deck and see if it still moves while the deck switch is engaged. You have it in gear (the lever under the machine that switches low/hi). If the mower comes on it is in low (won't work in high.) Yeah, can't say I'm much help on that one.
|
|
|
|
Post by larrys on Sept 7, 2018 13:02:23 GMT
Check and make sure the 48v is fully charged. Should be around 52v or more. Let the unit run for a couple hour sitting still to charge the batteries. If that helps then you have a battery issue.
|
|
|
|
Post by knotdone on Sept 7, 2018 14:04:09 GMT
UNIT WILL NOT CRANK. We have replaced the PCB and the unit cranked for a mere moment and shut off. We replaced the solenoid and the unit has not cranked since? Any ideas?
|
|
|
|
Post by larrys on Sept 7, 2018 15:08:11 GMT
Sent you an email
|
|
