pet36
New Member
Posts: 1
|
Post by pet36 on Dec 20, 2017 11:47:45 GMT
You have to vacuum out the area where the motors are others they get to hot, I blow my with a leaf blower,been good so far, until I hit a rock and bent the motor shaft, that's 400.00
|
|
|
Post by crawford on May 13, 2018 0:47:11 GMT
I think if you really look motor shaft isn't bent the small Allen screw is what is bent it mybe held in with lock tight you my need to heat shaft to release it the put in new one. The reason I say that is have you looked at size of main shaft of motor then the allen screw which holes blade ?
|
|