|
Post by Nick b on Sept 15, 2018 1:28:05 GMT
I’m having a problem with my raven mpv. At first both blades started to shut off and back on again at random times. Didn’t matter if it was tall grass hill or no hill. after the mower acted like it was completely dead but had plenty of juice. I found that one of the 100 watt fuses were blown ( the one that sits by itself) and replaced it. The mower now starts up just fine and everything works as it should but the blades I got to come on twice and they shut back off. And also one of the dc contactors,(the furthest back and the same with the fuse that blew) is vibrating like crazy and getting really hot after key being in the on position for a while . The Fuse hasn’t blown since I replaced it so far. Is that dc contactor related to blade function? Thanks in advance
|
|
|
Post by larrys on Sept 15, 2018 1:49:23 GMT
Does it do this when the deck is not plugged in at the big red connector?
Do you have a voltmeter to measure some voltages? If so, send me an email to shawnee28021@gmail.com and I will send you some things to check.
|
|
nick
New Member
Posts: 1
|
Post by nick on Sept 15, 2018 12:34:40 GMT
Does it do this when the deck is not plugged in at the big red connector? Do you have a voltmeter to measure some voltages? If so, send me an email to shawnee28021@gmail.com and I will send you some things to check. . Yes it still gets extremely hot without the deck being plugged up. With this seemingly being faulty does it mean my deck isn’t receiving enough juice to function or am I way off? I do have a tester and I sent u an email. Thanks again for the help
|
|
|
Post by larrys on Sept 15, 2018 15:31:07 GMT
Good possibility, we'll do some measuring.
|
|