|
Post by cougarmandan on May 19, 2019 5:40:45 GMT
My Raven moves fine. Recently it’s showing signs of a weak 48v pack but seems to function somewhat as a mower. I went to use the generator recently and I put the parking brake on and flip it over to generator mode and the engine dies. It won’t start in generator mode either. I had this issue in the past and noticed a spring hanging down under the brake pedal but this time the spring was completely off. I think it’s the brake safety switch maybe. It’s been so long since the I looked at it that I don’t remember how it goes together or if I might be missing something. Anyone have a diagram of where that spring is supposed to go or maybe some pictures?
|
|
|
Post by nittanydoug on May 21, 2019 15:27:26 GMT
|
|
|
Post by Shawn on May 23, 2019 0:39:32 GMT
Safety switch under the mower for the brake. Check the spring
|
|
|
Post by crawford on Oct 25, 2019 23:53:06 GMT
When it happen to me forgot to set parking brake.
|
|