|
Post by skiplietz on Aug 19, 2018 20:13:42 GMT
I have some parts available and a reliable source for many other potential parts that are typically required to keep the MPV running if you are in need of anything. They should be less expensive that what you currently see listed online. Message me with your needs and I will reply if they are available. I'm not on the forum too often so it might take a little while to reply. I need a voltage regulator and a blowup for the ignition or New ignition if it comes as a single unit. Slietz@dirtdealers.com
|
|
|
Post by larrys on Aug 19, 2018 22:25:19 GMT
skiplietz - sent you an email. Not sure what you are asking in regards to the ignition.
|
|
|
Post by Mikey on Aug 21, 2018 1:14:02 GMT
anyonr have a voltage regulator available, thanks
|
|
|
Post by Mikey on Aug 21, 2018 1:18:11 GMT
If you have a voltage regulator my email is mschei5161@att.net
|
|
|
Post by larrys on Aug 21, 2018 1:28:33 GMT
Mikey - have you confirmed you need and AVR? What are your symptoms? Not charging or no output at the gen panel?
|
|
|
Post by larrys on Aug 31, 2018 13:26:18 GMT
I have or have access to any parts you might require for general maintenance (filters, blades and etc.) or repairs parts for the MPV. I have aggressive tire sets, complete refurb deck assemblies, camo plastic conversion kits, replacement eng/gen assemblies and slightly used complete units as well. I do not list online due to all the selling fees imposed. You can email me at shawnee28021@gmail.com for pricing on any parts you might need. I will try to match or bet anything listed online and take payments through Paypal.
Keep in mind that when you buy parts from some online sites you might not get everything you need. For example, some blade motors don't have the stud installed to attach the blade-mine do (I do have a kit that included a new stud, washer and lock nut). The AVR does not come with instructions on how to set it correctly as these are not plug and play items-mine do. Replacement blades do not come with new lock nuts-mine do. I'm sure there are other situations too.
Thanks
|
|
tom
New Member
Posts: 8
|
Post by tom on Sept 4, 2018 17:51:50 GMT
Larry - I noticed you mentioned your blade motor with a new stud and lock nut. I'm currently pulling apart my spare deck and parting everything off it. One of my motors has a bent shaft as I angled wrong when mowing and the blade got caught on dirt. Couldn't believe it actually bent, but that seems to be a weak spot on these motors. Can this be rebuilt? I listed the item on ebay last night and not sure if it's something better just throwing away if it can't be fixed. I don't want anyone to get stuck with something that can't be fixed. I pulled off 2 working motor controllers and one other blade motor that works fine and in good shape. I'd like to get rid of the deck, but being 100lbs, I'd have to get rid of that locally. Thanks, Tom
|
|
|
Post by larrys on Sept 4, 2018 22:39:40 GMT
Tom - It can be removed. It needs to be heated up and using a vise or any other clamping method to hold the shaft, use an allen wrench to remove the stud (going to be tight). The studs list for $10 online. I supply mine with a small tube of Loctite when I ship.
|
|
|
Post by knotdone on Sept 7, 2018 13:51:27 GMT
I have some parts available and a reliable source for many other potential parts that are typically required to keep the MPV running if you are in need of anything. They should be less expensive that what you currently see listed online. Message me with your needs and I will reply if they are available. I'm not on the forum too often so it might take a little while to reply. Do you have a PCB? We replaced the solenoid and the PCB, but think the PCB may be bad?
|
|
|
Post by larrys on Sept 7, 2018 15:07:33 GMT
Yes, I have them
|
|
drion
New Member
Posts: 2
|
Post by drion on Sept 7, 2018 15:18:53 GMT
Larry's, looking for the foot throttle and cable. Do you have any, and how much?? dm.rion@yahoo.com.
|
|
|
Post by larrys on Sept 7, 2018 16:00:50 GMT
Yes, I have the throttle pedal. No cable as it is drive by wire.
|
|
gary
New Member
Posts: 4
|
Post by gary on Sept 8, 2018 1:52:43 GMT
I have some parts available and a reliable source for many other potential parts that are typically required to keep the MPV running if you are in need of anything. They should be less expensive that what you currently see listed online. Message me with your needs and I will reply if they are available. I'm not on the forum too often so it might take a little while to reply.
|
|
gary
New Member
Posts: 4
|
Post by gary on Sept 8, 2018 14:35:05 GMT
larrys, since manufacturer is out of business I am desperate for a parts source. need a voltage regulator I think. Only 22 vdc at cable feeding 48v battery pack. Im Gary Anderson anderson3737@sbcglobal.net.
|
|
|
Post by larrys on Sept 8, 2018 15:59:37 GMT
Got you covered, will send you an email.
|
|